Industrial Epoxy Flooring

Every job and system is different, Depending on the scope of work, the size of the floor and the system you choose. As a result, every timeline is different, so you’ll get a clear one in your quote before any work starts.

Yes. Every job is tailored to your schedule and operating hours. In other words, the work fits around your business rather than the other way around. Just tell us how your site runs and we’ll plan the job to suit.

It depends on the system you choose. For example, different coatings need different cure times before they can take forklifts and heavy traffic. For that reason, we’ll confirm the return-to-service time for your floor before we start.

Any old flooring or coatings are removed. Then the slab is freshly resurfaced with diamond grinding before the new system goes down. Diamond grinding allowed for a mechanical bond between the surface and coating.

Yes. We can mark forklift lanes, pedestrian walkways, pallet bays and hazard zones on any job. That way, you don’t need a separate contractor.

Every site and job requires a different coating. Therefore, we’ll recommend a finish to suit how each area is used, including how much grip it needs when it’s wet or oily.

We work that out with an on-site consultation. During the visit, we look at the slab, the traffic, the chemicals and how each area is used. After that, we recommend the system that suits your site. Since there’s no one-size-fits-all answer, we don’t guess from a phone call.

It depends on the system you choose and how the floor is used. For instance, vehicle traffic, chemicals and cleaning all play a part. We’ll talk you through what to expect for your site during quoting.

Yes. However, a new slab needs at least 30 days after it’s poured to fully cure before it can be coated. Once it’s cured, we can prepare it and apply your chosen system.

Care depends on the system you choose. Different coatings have different cleaning and maintenance needs, we’ll give you care instructions for your floor when the job is finished.

Yes. Although we’re based in Brisbane, we service industrial sites right across Queensland.